Tuesday, August 13, 2019

How to calculate weight of bar



How to calculate weight of bar

     As we all know on the construction site that is most important for the engg. or             superviser how many steel bar are required in any footing,column,beams and slab.

      Let us we know about the steel bar
              
      Here is many type of bar
              
  1. 8 dia
  2. 10 dia
  3. 12 dia
  4. 16 dia
  5. 20 dia
  6. 25 dia
  7. 32 dia

we have the length of 10 dia bar of 12 m how to know the weight of whole length of bar 
Note:- weight of bar always in k.g. or ton 


The formula converts the length of steel bars to weight. We can also use the formula to know the unit weight of steel bars of different sizes.
The Formula is, D²L/162


Where,
D = Diameter of steel bar in Millimeter

L = Length of steel bars in Meter

Lets know about the formula
Cross-sectional area of bar x Length of bar x Density of iron 
So
    W = A x L x ρ

Where,
A = Area = πD²/4 
π (pai) = 3.14
D = Diameter of steel bar in meter (steel bar size is measured in millimeter).
L = Length of steel bar in meter
ρ (Rho) = Density of steel bar = 7850 kg/m³



Hence,
                W= 3.14 X D²/4 X 7850 x L


                                                                    (Assume L = 1 m)

       Convert meter to milimeter


               W =6612.25 X D² x 10^-6 = D²/162





                                                                  
          w = 10 x 10 x 12/162 =7.40 k.g.


weight of 12 meter bar of 10 dia is 7.40k.g     


















             

AFFORDABLE WATER PROOFING






AFFORDABLE WATER PROOFING 


The solvents & substances which is used for water resistance in cement material that all work done process is known as WATER PROOFING.

Requirements of material for water proofing:-
  • Tapcrete 
  • Fibermesh net
  • Fosroc chemical
  • Grouting chemical (Any brand)

First,
          You have to clarify all over the area of tank is properly cleaned than begin the operation,you must cutted all the bar which have been used for wall shuttering inner side and outer side.
Cutted outer sides of all bar and make 10-15 mm hole surrounding of bar than make a solution of cement and tapcrete like clay,clean the surrounding area of bar than spread or wash the hole by slurry and than filled the holed area by clay solution.All these holes must be filled with that solution.

NOW,
            Start inner side process clean all over area,make a cement and tapcrete solvent ,Ratio should be 3:1 three part of water and one part of tapcrete chemical,cement can be used own requirements.With the help of brush wash or make a coat of that solvent on the floor of tank ,leave it for 1/2 an hour for drying.
 Than start second process make another coat of that solvent and than laying the Fibermesh net all over the floor.Than apply one coat over the Fibermesh net and leave it for 4-5 hour.After drying this Fibermesh net you can start further process.

In this process most important is  to water proof a wall ,where bars is being shown like as









near that area make a hole with the help of drilled machine approx 100mm is wall thickness is 200.mm all over the wall area and near the bar makes that type of hole and do Injection Grouting. 


What is Injection Grouting?

A chemical pouch of any brand (water proofing) mix it in 50 k.g.of cement properly with suitable proportion or requirement water like slurry,than inject it in hole with the help of injection grouting machine.





After this process start the tapcrete solvent coat on the walls and than paste the fibermesh net to walls and than make second coat on wall.Now you can start the plaster .

Remember you can't plaster it with Jamuna sand ,make plaster with fine course sand and mix some water proofing chemical than start plaster.


          

How to calculate bricks in a wall




  How to calculate bricks in a wall


In this we will learn how we calculate the no. of bricks required 
 in a wall,it can any type small, bigger, thicker.




  1. We know the standard size of bricks is 9inch x 3inch x 4 inch.
  2. We have required area of one brick.
  3. As we know area of one brick is = 36 inch
Sample Question:- 

Assume that we a 100 sq.ft wall of thickness is 4 inch than how many bricks will required ?

First,
         we should  known the Area of one brick & area of wall as we know the area of one brick is 36 inch and area of wall is 100 sq.ft.

Now, convert the area of wall in inches than 100 sq.ft x 144 inches =14400 inches
        
Divided the wall area by one brick area

                                                                               
   14400/32 = 450 nos      


 Now we will also calculate required sand and cement.


         We know the area of wall 100 sq.ft. which is 0.0333ft thickness convert these area in cubic meter than

        100 sq.ft x0.0333 ft =33.3 cubic ft 
              
As we know, 1 cubic ft is equal to 0.0283 cubic meter
          So  
                  33.3 cubic ft x 0.0283=0.942 cubic meter  that is volume of wall 

                  volume of one brick in m3 = 0.00176

         Now
                 we know the no. of bricks required in  100 sq.ft wall is 450 nos.
         than total volume of wall is 0.00176 x 450 = 0.792 m3



         Divided the wall volume by brick volume 
             0.942/ 0.792   =1.89 cubic meter sand required
                                                                      


How to calculate weight of bar

How to calculate weight of bar       As we all know on the construction site that is most important for the engg. or          ...