Tuesday, August 13, 2019

AFFORDABLE WATER PROOFING






AFFORDABLE WATER PROOFING 


The solvents & substances which is used for water resistance in cement material that all work done process is known as WATER PROOFING.

Requirements of material for water proofing:-
  • Tapcrete 
  • Fibermesh net
  • Fosroc chemical
  • Grouting chemical (Any brand)

First,
          You have to clarify all over the area of tank is properly cleaned than begin the operation,you must cutted all the bar which have been used for wall shuttering inner side and outer side.
Cutted outer sides of all bar and make 10-15 mm hole surrounding of bar than make a solution of cement and tapcrete like clay,clean the surrounding area of bar than spread or wash the hole by slurry and than filled the holed area by clay solution.All these holes must be filled with that solution.

NOW,
            Start inner side process clean all over area,make a cement and tapcrete solvent ,Ratio should be 3:1 three part of water and one part of tapcrete chemical,cement can be used own requirements.With the help of brush wash or make a coat of that solvent on the floor of tank ,leave it for 1/2 an hour for drying.
 Than start second process make another coat of that solvent and than laying the Fibermesh net all over the floor.Than apply one coat over the Fibermesh net and leave it for 4-5 hour.After drying this Fibermesh net you can start further process.

In this process most important is  to water proof a wall ,where bars is being shown like as









near that area make a hole with the help of drilled machine approx 100mm is wall thickness is 200.mm all over the wall area and near the bar makes that type of hole and do Injection Grouting. 


What is Injection Grouting?

A chemical pouch of any brand (water proofing) mix it in 50 k.g.of cement properly with suitable proportion or requirement water like slurry,than inject it in hole with the help of injection grouting machine.





After this process start the tapcrete solvent coat on the walls and than paste the fibermesh net to walls and than make second coat on wall.Now you can start the plaster .

Remember you can't plaster it with Jamuna sand ,make plaster with fine course sand and mix some water proofing chemical than start plaster.


          

No comments:

Post a Comment

How to calculate weight of bar

How to calculate weight of bar       As we all know on the construction site that is most important for the engg. or          ...